Automatic Case Packers: How to Select by Loading Style, Package and Speed

Specifying a LINEVO automatic case packer (LV-P250 top-load, LV-P200 side-load, LV-P270 bottom-load, LV-P320 30 CPM wrap-around, or LV-P3103 drop packer) starts with three physical inputs: primary package rigidity during collation, corrugated blank format (FEFCO 0201 RSC vs FEFCO 0409 wrap-around), and +20% to +25% OEE surge capacity above your upstream filler or bagger.

Infeed Bag Conditioning, Servo Collation & Pick-Head Cycle Math

Flexible pouches and VFFS pillow bags (50 g to 3.0 kg) trap headspace air and shift center-of-gravity during high-speed transfer. Before selecting a frame, run your primary bagging rate (BPM) and pack matrix (Rows × Columns × Layers) through our case packer speed and collation calculator and enforce three mechanical rules:

1. Vibratory Deaeration & Caliper Leveling (±2.0 mm): Pouches discharging from an 80–140 BPM vertical form-fill-seal bagger or horizontal premade pouch machine pass through an inclined take-away belt and a spring-mounted vibratory flattening conveyor (LV-BC120). Expelling trapped headspace air equalizes bag thickness within ±2.0 mm so stacked layers never crown above the RSC flap score line.
2. Separating Case Throughput (CPM) from Gantry Pick Cycles/Min: A 2-axis servo gantry (LV-P250) runs safely at 15 to 20 pick cycles/min. On a single-layer case (L = 1), 20 cycles/min yields 20 CPM. On a 3-layer snack case (L = 3), a single pick head completes 6.6 CPM—so lines requiring 14 to 20 CPM on multi-layer pouch cases specify the LV-P250-2C dual-case pick head (loading two cases simultaneously) or a LV-RD120 4-axis Delta vision cell (60–120 picks/min).
3. Multi-Zone Vacuum Bellows vs Clamshell Cradle Tooling: Smooth laminate pillow bags below 1.0 kg use Piab / Schmalz multi-stage Venturi silicone bellows with independent check valves. Heavy liquid pouches (1.5–5.0 kg), dusty powder bags, or stand-up Doypacks packed vertically (SRP) use servo clamshell fingers and diving partitioning plates so zero vacuum tension is applied to the top heat seal.

Compare related configurations and sizing tools across case erectors and case sealers, top-load and pick-and-place case packers, side-load and horizontal case packers, wrap-around and tray packers, drop and gravity case packers, robotic case packing systems.

RSC Blank Squaring, Diving Funnel Guides & 15-Minute Changeover

Even the fastest servo collator will miss shift OEE targets if the case erecting, flap sealing, or downstream accumulation module jams on high-recycle corrugated board. LINEVO enforces four mechanical design standards across every station:

4-Gate Factory Acceptance Testing (FAT) & Turnkey Line Qualification

Before any LINEVO case packer, case erector, or integrated monoblock (LV-P200-MP) is approved for crating, our engineering team executes a documented 4-Gate Factory Acceptance Test (FAT) using 30 to 50 of your actual knocked-down corrugated blanks and production product samples:

• Gate 1 — 30-Minute Uninterrupted Run at 100% Rated CPM: The machine packs 300 to 900 consecutive cases at full contract speed with ≥98.5% net completion, zero vacuum-drop misfires, and ≥80% hot-melt fiber tear across all four major flaps.
• Gate 2 — Timed ≤15-Minute No-Tool SKU Changeover: A single technician switches the machine from your smallest SKU to your largest SKU using only the Siko digital counter recipe sheet and quick-release pin mandrels, verifying first-case diagonal squareness within ±1.5 mm.
• Gate 3 — PackML Upstream & Downstream Handshake Simulation: Full verification of dry-contact or Ethernet/IP / Profinet interlocks with upstream checkweighers, metal detectors, downstream LV-9560PL print-and-apply GS1-128 labelers, and 24V MDR accumulation conveyors.

To get a formal cycle-rate calculation, CAD floor layout, and itemized engineering quotation for your package and box drawing, message our LINEVO engineering team directly on WhatsApp.